Results 1 to 10 of 10

Thread: trouble connecting 2nd computer thru wireless router

  1. #1

    ZeroPaid Regular

    Join Date
    Mar 2004
    Posts
    46

    Smile trouble connecting 2nd computer thru wireless router

    hi people im a noob as far as anything technical goes with computers,i recently changed to wireless internet and my brother wishes to connect using his laptop,hes got the card and password but it still doesnt connect to internet,is there a plug in i need or should i ring support number,its a netgear router,thx in advance!

  2. #2
    mountain_rage's Avatar

    Zeropaids nipple

    Join Date
    Mar 2004
    Location
    purgatory
    Posts
    7,069
    It all depends on the extent of your security settings.

    First make sure your brother has his wifi turned on. If its built into the laptop their is usually a switch, if not make sure its enabled and all the drivers are probably installed. Also make sure his wireless card able to pick up the signal. So check if his card is b, g or N. Make sure that everything is compatible with your router.

    After that enter into your routers settings window. This can usually be achieved by typing something along the lines of 192.168.0.1 or 192.168.1.0 into the address bar of your browser. If neither of those work you can check the underside of your router for the address or possibly the manufacturers website.

    In this screen you should have a wireless settings category. Look for something along the lines of wireless access list, or mac address list. This menu allows you to restrict or allow connections to specific computers based on their Mac address . If enabled only the computers added to the list will be able to connect to the network. Although this can vary from router to router. So if enabled add your brothers mac address to the list, if not enabled I would suggest enabling it in the future as an extra layer of security. If you don't know your MAC address go to start-run type in cmd and hit ok. Now in the command prompt type in IPCONFIG /ALL and look for the card you want to add.

    Lastly you have to make sure that your wireless encryption settings are properly setup. Find out if you are using WEP, WPA, etc... Then the proper sub categories also have to coordinate. Then come up with your password or pass phrase write it down. Then once set up go and type in the Password in each computer you want to connect to the network.

    Hope that helps
    Anyone upset or offended by my post please follow the link and let your opinions be known.
    http://www.zeropaid.com/bbs/showthread.php?t=55492

  3. #3
    Krell's Avatar

    worthless dirtball

    Join Date
    Sep 2002
    Posts
    9,759
    I just woke up, im not caffeinated, and I look like Willie the homeless clown with my hair sticking up . . .

    but it occurs to me

    You need to update the firmware on that router before you try to configure clients to it.

    And btw - if theres any way to return that router and get a linksys wrt54, do it, do it now.

    .

  4. #4
    mountain_rage's Avatar

    Zeropaids nipple

    Join Date
    Mar 2004
    Location
    purgatory
    Posts
    7,069
    Quote Originally Posted by Krell View Post
    I just woke up, im not caffeinated, and I look like Willie the homeless clown with my hair sticking up . . .

    but it occurs to me

    You need to update the firmware on that router before you try to configure clients to it.

    And btw - if theres any way to return that router and get a linksys wrt54, do it, do it now.

    .
    I have to agree, Netgear is quite the piece of junk. The Netgear router my father had bought before his Linksys, was slow and always lost connections. It also had terrible range, even when connected to another Netgear card.
    Anyone upset or offended by my post please follow the link and let your opinions be known.
    http://www.zeropaid.com/bbs/showthread.php?t=55492

  5. #5
    Boomer The Dog's Avatar

    Anthropomorphic

    Join Date
    Jun 2005
    Location
    Pittsburgh PA
    Posts
    539
    I see that people get Netgear because their equipment, like Belkin is inexpensive. The Netgear WGR 614 is so common, and you can get it for US$30. My neighbor had her Vonage terminal drag that router down, and she would have to reboot the router daily, and we even thought about putting a timer on it to cut the power off in the middle of the night.

    I think that router is okay, it's best for a smaller house or apartment with a few rooms.. Dimeslime, post your router's model number here, and about the error that your brother is getting.

  6. #6

    ZeroPaid Regular

    Join Date
    Mar 2004
    Posts
    46
    thx for help ill try some suggestions out,thx heaps

  7. #7
    calouc

    Guest
    You know,this is like this in everything in computer,this is alway sensed to work but it never does.Good luck!

  8. #8
    Krell's Avatar

    worthless dirtball

    Join Date
    Sep 2002
    Posts
    9,759
    Quote Originally Posted by calouc View Post
    You know,this is like this in everything in computer,this is alway sensed to work but it never does.Good luck!
    CALOUC

    STOP fucking posting.

    Just stop. All your posts are worthless spam in the last few hours trying to get your post count up, which is on the verge of getting you a ban.

    You already have about -500 points


    .

  9. #9
    calouc

    Guest
    GET FUCKED!!!
    I just want to take my account up and to be able to sell revtt account,and everybody's fucking me!1
    Banned me if you want,shit tere's plenty of forum like this one that wouldn't shit on me like this at every post I do.
    I can say that everything's bugging in a computer and that's true.

  10. #10
    mountain_rage's Avatar

    Zeropaids nipple

    Join Date
    Mar 2004
    Location
    purgatory
    Posts
    7,069
    Quote Originally Posted by calouc View Post
    GET FUCKED!!!
    I just want to take my account up and to be able to sell revtt account,and everybody's fucking me!1
    Banned me if you want,shit tere's plenty of forum like this one that wouldn't shit on me like this at every post I do.
    I can say that everything's bugging in a computer and that's true.
    I'm glad, go to those other forums, common move along. Unlike those other forums we have some sense. Private sites are private for a reason. To some degree I can tolerate trading, sadly your the lowest common denominator of trading, a seller. So please leave, no one wants you here.
    Anyone upset or offended by my post please follow the link and let your opinions be known.
    http://www.zeropaid.com/bbs/showthread.php?t=55492

Similar Threads

  1. Potatos
    By moneoa in forum Polls
    Replies: 19
    Last Post: June 15th, 2006, 05:29 PM
  2. Is Your Son a Computer Hacker?
    By silentscream in forum The Lounge
    Replies: 36
    Last Post: March 3rd, 2006, 11:59 PM
  3. computer tech and dummies
    By crackerjacker in forum The Lounge
    Replies: 14
    Last Post: January 12th, 2006, 03:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •