Azureus Strange NAT problem

[CreationP]

I have a strange problem that i really cannot understand and some help would be precious.

I have opened the TCP and UDP ports from 16800-16809 for azureus.

I have created exceptions for it and UPnP in tcp/udp for 16800.

I have done the same things for 6881 and 6889.

The strange thing is that the distributed databased is connect and NAT shows as green but i cannot do the NAT/Firewall test for the 16800,16801 and 6881 ports.

The exact msg is "Test cannot be done" (translation from Greek).

I;m using modem with DSL 768 and my max speed at the problem is 30kbs although i needed to have at least 40kb/s.

ALso don't forget that i have green faces and NAT reachability OK with green.
Some help is needed.

[Stownplayer]

http://portforward.com/default.htm or google will solve your problem.

Good luck

[jeddah_1983]

i try that things
didnt work sorry

[LapamRd23]

http://portforward.com/default.htm or google will solve your problem.

Good luck

it helped me thanx alot

[Stownplayer]

i try that things
didnt work sorry

Post some details and maybe we can get it running. WHat is your setup, connection, what client are you using? Give all the info related to the exact problem you encounter.

best of luck

[jeddah_1983]

Post some details and maybe we can get it running. WHat is your setup, connection, what client are you using? Give all the info related to the exact problem you encounter.

best of luck

i use Azureus
windows Xp prof SP2
the ratio is yellow
nat is said ok but when i test the port its said error!!!! i dont underswtand it
the users is green
so 1 yello the raito and the tow others are green
my ISP 256 unlimited guess i dont have prob
my direct download usualy between 20 to 30
i've try everything to make it best but nothing happen
plz what else should i write to help me????
uh and the download between 1kb to 5 sometime its goes to 10 then quickly down to 2 or 3kb
i open ports i did everything
ok
any help

[crazyjockey]

Go here to test the ports
https://www.grc.com/x/portprobe=
put that link into your browser, and put whatever port number you want to test on the end of the equals sign.

If you don't get the response that the port is OPEN, then check to make sure your modem is DMZ'ing (or bridging, depending how you configured it) to the router/firewall, the router is forwarding the ports to your PC, and you don't have any firewalls turned on on your PC.

Also, why are you using UPnP? You don't need to be using it because you've manually forwarded your ports. And why are you using so many ports? You only need 1 port for TCP listen and 1 port for UDP listen.

[jeddah_1983]

Go here to test the ports
https://www.grc.com/x/portprobe=
put that link into your browser, and put whatever port number you want to test on the end of the equals sign.

If you don't get the response that the port is OPEN, then check to make sure your modem is DMZ'ing (or bridging, depending how you configured it) to the router/firewall, the router is forwarding the ports to your PC, and you don't have any firewalls turned on on your PC.

i've try all the port in my NAPT Entries and all of them are close
i open it and i did it and all close
how i know and how to open them again
i really get so tire from this
plz help
i turn the firewall off no longet open
unpn is auto enabled also
so what else or who to make NAT ok

[Winston84Smith]

Azureus only needs 1 port ,maybe the WIKI has some info you can use ?
http://www.azureuswiki.com/index.php/PortForwarding
But you can only do the NAT test for one port ( the one you have defined in Az-Options )