I just installed a new DVD drive "Super Multi DVD Writer"GSA-4040B but I am having problems with it...
When i go to Add new Hardware and checks if its working fine..everything seems okay and it shows on my Computer that there is a DVD drive installed..It doesnt take long though till everything disappears even in the listed installed hardwares it disappears.....I have put the drive where the CD drive was, so it means I am having Two DVD drives..I dont know if there is a conflicting problem or what....could someone please help..i will appreciate.
Thanks inAdvance
NetZero20001
if they are on the same IDE cable, make sure one drive's jumper is set to Master and the other is set to Slave.
you can usually find jumper setting diagrams on stickers on the drives themselves.
Google | cpugeniusmv
"I have no special talents, I am only passionately curious."
Albert Einstein
Ask smart questions!
It's called "reading."Originally Posted by netzero20001
Left to Right. Top to Bottom.
:fire
"CompuGeek your geekiness is unsurpassed except by your virginity." - Trilobyte
I am new in this computer world so i dont know how to set drive jumpers and the worst thing..it cannot show the two icons of the drives on my computer folder.....there is only one icon and when i right click on it and click on eject the two drives opens up....so i was asking if there is a conflict or what..and if so could you please help me to avoid that.The new drive i have installed it shows that its working well but when i put in the CD it does not respond. thanks again.
that's pretty awesome!! i'd keep it!
but seriously...
read the manual, or check the sticker on the new drive...and set it to "Slave" or "Secondary"
whatever they call it now :)
Google | cpugeniusmv
"I have no special talents, I am only passionately curious."
Albert Einstein
Ask smart questions!
You guys are just wondeful.......No words to decribe How happy i am right now...
Thanks alot Guys and keeep up a good jobb
NetZero20001
Most new drives have a CSEL jumper\switch in the back. Set both drives to csel and the computer figures out which drive is master and slave. You can only have one master, and one slave per each ide cable.
If you have both drives as "D:" then change one of the drive properties in windows to "E" or another free drive letter.
put all drives to csel and it is an easy install.
Good luck.
Is it not a feat sublime? Intellect hath conquered time.
Thanx Guys for the help..I managed to resolve the problem. I did a stupid thing putting all the drive on Master..Thanks for pointing that out..so everything is now cool....I really appreciate your help guys. keep up the good work..
This thread is now officially closed..
NetZero
/me tries putting both his optical drives on master to see if he can reproduce the "both drives opening" trick
Google | cpugeniusmv
"I have no special talents, I am only passionately curious."
Albert Einstein
Ask smart questions!
hehehehe.....that only works in my computer..
Posting Permissions
Reply With Quote
Bookmarks