Results 1 to 11 of 11

Thread: Speaker problems

  1. #1

    ZeroPaid Regular

    Join Date
    Nov 2002
    Location
    Illinois
    Posts
    51

    Speaker problems

    Ok, so I finally bought some nice new speakers for my computer so I can listen to my music in all it's glory.. it's a 5 speaker surround sound set, (2 front, 2 rear, & subwoofer). Now, it's all set up properly, and I have everything hooked up, but only the 2 front and the SW actually work.

    Is this something to do with my sound card? I've never actually had to worry about it, so I haven't the slightest idea about it. But I'm guessing it's not surround-sound compatible.. which of course I didn't think about BEFORE buying the speakers, but such is life.

    Anyway, is this the most likely reason for the situation, or is there possibly something else I overlooked? I can provide computer specifics, just let me know what you need (and I have no idea where to find info about my sound card.. I'm retarded, I know. =o)

  2. #2

    ZeroPaid Regular

    Join Date
    May 2002
    Posts
    3,546
    wait for krell... he is the audio god
    nsap @ filesharingtalk.com

  3. #3

    ZeroPaid Regular

    Join Date
    Mar 2003
    Location
    USA
    Posts
    8
    I had a problem like that.I bought Klipsch promedia 4.1 speakers and the 2 rear speakers were not working .I had to change the settings of my sound card from 2 speaker setup to 4 speaker setup.So u can try the same thing to see if ti works.

  4. #4
    Krell's Avatar

    worthless dirtball

    Join Date
    Sep 2002
    Posts
    9,759

    jlee48

    heh heh whats up girl?


    What do you think those rear speakers run on, magic dust? : )

    They need to get the signal from some where, and thats either another connector on the main set, or the rear sp connector on the sound card.

    Some powered speaker systems, will have all the amplifier built in to one area, and from there, you have the front, rear, and sub.

    Other systems have a true surround, which is decoded by the Sound Card, so that the REAR channel, is truely the Dolby rear channel. If thats the case, then your rear speakers must be plugged in to the proper sound card OUTPUT.

    1) check the OUTPUTS on your computers Sound Card, you may not have the Rear ones in the proper place. Do you have a jack on the sound card that is black?

    2) DO check the 4 speaker setup under the Sound properties in Control Panel and see if that turns them on.

    3) If you DO HAVE the speakers plugged in to the proper place, and have selected the 4 sp setup, it still MAY NOT be active. On some sound cards you may need to install the appropriate software, not just the basic drivers, to get the RR channel to work.

    With music playing, unplug the line to your Main Speakers, (on your sound card) and plug them in to the RR channel. If music does not come out, then it is not active, plug it back in till music resumes.

    3) if this does not produce results, use the Aida32 util (I KNOW you must have it) to tell me what your sound card brand and model is. Also, is there any chance that you still have the CD that came with it?

  5. #5
    aqlo's Avatar

    Cartoon Superhero

    Join Date
    Mar 2003
    Location
    uranus
    Posts
    2,125

    Krell's Enormous Brain

    Wow you are smart Krell!!!

    Going off on a contingent here (as my illiterate "humanities" prof used2 say)

    Can you tell me please what would cause Mom's second-hand pc to play mp3s just great but when you put a regular cd in it goes woop woop woop in the background

    like vibrating volume rhythymically like along the lines of
    O say CAN you SEE by THE dawn's EARly LIGHT

  6. #6

    ZeroPaid Regular

    Join Date
    Nov 2002
    Location
    Illinois
    Posts
    51
    Hey there! I'm doing pretty good. =o)

    Yes, everything is definitely plugged in where it's supposed to be... I just checked the Sound Properties now, and it's set to the Surround Sound option. I also have SoundMAX, and that will not give the option to check anything more than a 2 speaker setup, or headphones.

    The sound card is the one that came with the computer when I bought it.. so it was all pre-installed for me.. I don't have a CD for it. =o/

    My best option seems to be leaning toward buying a new one, isn't it? *lol*

    Oh, and I have the Aida32 program, but it doesn't want to work for me... =o(

  7. #7
    Tremaine's Avatar

    3 dimes 4 nickels

    Join Date
    Apr 2002
    Location
    Ontario, Canada
    Posts
    314

    soundcard

    My soundcard died today!
    Favorite P2P Programs
    KazaaLite...(K++)
    PTC client(Bittorrent)
    Emule(plus mod)
    Packetseek(IRC)

  8. #8
    Krell's Avatar

    worthless dirtball

    Join Date
    Sep 2002
    Posts
    9,759
    *makes weird nyehhh sounds*

    That IS a mystery, as an MP3 has to be decompressed, which takes more cpu usage and resources. However, the CD player has to use the IDE bus, and also send info from a buffer on the player itself. If the CD Player has a mechanical problem that prevents that buffer from remaining full, such as a dirty or scratched CD, or drive moter malfunction, then I can see where the signal to the sound card will be intermittant, but not just up and down in volume. Does the CD player appear to change rpm and spin up and down also?

    The sound card requires and IRQ, and the drivers require a memory space, that "could be" shared by another device, and they are battling it out. This is more common in a W95, W98 environment.

    You might try the Aida32 util to see what those settings are, or use the System Information

    System Information - Microsoft wants this to the be starting point for troubleshooting. You can launch other utilities from SI by going to its TOOLS dropdown menu. SI gives you a very complete summary of your system configuration; in terms of hardware resources and software installed drivers. It even tracks when you've change a driver. Start SI by running MSINFO32.EXE.

    System Config Utility - This may be the best troubleshooting tool Microsoft gave to support people. Want a user to switch to standard 640x480x16 colors video mode? No need to walk the user through the tedious steps of going into display properties / settings / etc. Just check a box in SCU and you're done! Likewise for editing your SYSTEM.INI and WIN.INI and Startup folder. Just check and uncheck boxes. Very cool. Start SI by running MSCONFIG.EXE


    Look under Hardware > IRQ, and Problem Devices

    Also, make sure that DMA is enabled on that machine, as it will affect BUS performance.

  9. #9
    Krell's Avatar

    worthless dirtball

    Join Date
    Sep 2002
    Posts
    9,759

    jlee48

    YOURE JINXED !

    lol ok, now take a deep breath . . . what c a n you tell me about it? What is the comp make and model?

    And how on earth is Aida32 NOT working for you? Sweety, if you can break that, I'm scared.

    Look in Control Panel, under the Sound properties, it says to use " " device? What does that say to use?

    Throw me a bone here k?

  10. #10
    aqlo's Avatar

    Cartoon Superhero

    Join Date
    Mar 2003
    Location
    uranus
    Posts
    2,125
    Thanks I will look for conflicting IRQs and if DMA is on when I am over there, yes it is w98, I am been leaning in the same direction as jlee in terms of just swapping out the card and seeing if that helps

    hey tremaine try selling your broken thing to my mom everyone else does

  11. #11
    Krell's Avatar

    worthless dirtball

    Join Date
    Sep 2002
    Posts
    9,759
    *rolls on floor laughing*

    I had to read that twice


    btw, watch Most Extreme Eliminating Challenge for a good laugh

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •