Azureus? help?

[bobo1]

Setup: Linksys router
Sygate Personal Firewall
Avg Virus Scan
Basic xp (no sp1 or sp2)

Problem: cant connect

Details: Now i have Disabled my XP firewall.
allowed my sygate firewall to run javaw.exe.
opened my ports to 46331-63556 set it for both tcp/udp
and set my port to 48422(random) .

can some one guide me here with there setup/configuration or with any tips..

[Jared Moya]

under TOOLS go to NAT / FIREWALL TEST change port to one within your port range specs, i.e 48000 first, then clickTEST to make sure it works. If not bring up router configuration wizard and set the router's PORT FORWARD setting to include your PORT RANGE as well. This should work. If not, then its your anti-virus firewall protection program, and this well need to be adjusted to leave these ports open. I reccomend ZONEALARM PRO, it can be a tad tedious but is fairly user friendly and has a decent user interface that makes changing and adjusting the settings on it fairly easy.

[cpugeniusmv]

opened my ports to 46331-63556 set it for both tcp/udp
and set my port to 48422(random) .
If you select random it overrides the port you specified. Uncheck random, and leave that port number selected.

[Krell]

Yah, use the Linksys app, 192.168.0.1 etc, and make sure you CHANGE that password on the router!!

Allow a specific port both in and out for YOUR IP address.

If you are 192.168.0.2 then use that #

Also, with Sygate, make sure the app has permissions, set to ALLOW.



.

[bobo1]

It doesnt even start the downloads..
i went in router configuration

did the previous ports i listed above, then did 8000-9000 a whole bunch of things.very dissapointing, 6881-6889 worked back in the middle of the year i wish it stayed the same =(

:edit: btw i installed zone alarm and allowed the programs to connect but still doesnt work. thanks for the help

[Jared Moya]

have u tried analyzing your azureus connection configuration, that could be the final piece that needs to be adjusted....

[bobo1]

how do i do that? and its wierd it says tracker status OK but it just wont start the download therefor its a RED smiley

:edit: ok guys ive just installed bitcomet and im getting 250-300 kbs some times idles around high 300's
i see something was just wrong with the azureus configuration i had. thank you for the help

[Jared Moya]

look at my post above with the screenshots to see if azureus is configured right